Transcript

To access the ProTrack Control 100's Web UI, begin by navigating to the Network tab on the ProTrack Control 100 and enabling DHCP. Next, prepare a switch capable of assigning IP addresses, then use ethernet cables to connect both the ProTrack Control 100's IP port and your computer to the switch, ensuring that both are on the same network. Return to the ProTrack Control 100's menu to confirm its IP address, then open a browser on your computer, enter the ProTrack Control 100's IP address in the address bar, and you will be taken to the Web UI. The default login credentials for both username and password are admin.

The ProTrack Control 100's Web UI mirrors the on-unit menu. If you notice any discrepancies between the Web UI and the unit's display, simply refresh the page.

Hot Key tab — the cameras currently assigned to Cam 1 through 4 are displayed here. Clicking on any Cam 1 through 4 entry will open a pop-up window where you can access the device list directly and reassign the camera. Remember to press Confirm when finished.

Device Management tab — the device list and Ignored List are both visible here. The Web UI also supports manually adding cameras to either list, and the list information can be refreshed from this page as well.

Protocol tab — allows you to modify NDI settings and the RTSP stream address.

Network tab — displays network-related information for the ProTrack Control 100. Disabling DHCP allows you to manually configure up to three additional static IP addresses.

Security tab — allows you to set a password for accessing the menu. Clicking the Settings button beside Control Permission opens the permissions configuration window. After making changes, remember to press Confirm in the lower right corner, then click Confirm once more.

System tab — allows you to export and import user configuration profiles, as well as add new users.

Firmware tab — simply drag and drop the firmware update file downloaded from the official website onto this page, and the device will update automatically.

Device Information tab — in addition to displaying device information, this tab also allows you to reboot the unit.

This concludes the Web UI overview for the ProTrack Control 100.