To access the OSD menu of the PTC-205, you must use the RMC-1AT remote control. Pressing the Menu button will open the OSD menu.

Transcript

To access the menu of the PTC-205, the RMC-1AT controller must be used. Pressing the Menu button on the RMC-1AT is the only way to open the menu.

The PTC-205 menu consists of eight tabs. The first tab is Tracking.
In this section, users can enable or disable the Track Mode.
Each item within the menu corresponds to a control button in the Web UI.
The Half Body Presetting function allows for finer adjustments when Figure Size is set to "Half Body."

A detailed explanation of the Auto Tracking function will be provided in a dedicated instructional video.

The Setup tab allows users to select the control Protocol, offering three options: Pelco-D, Pelco-P, and VISCA.

The Camera tab provides basic image adjustment settings.

The PTZ tab includes pan, tilt, and zoom settings.
When Speed by zoom is set to "ON", the pan and tilt speeds decrease at the telephoto end and increase at the wide-angle end.

Image Freezing refers to a function where the video temporarily freezes when a preset is recalled. The image remains frozen during the camera movement and resumes playback once the camera reaches the preset position.

Acc Curve adjusts the acceleration behavior.
For a smoother and more gradual camera movement, select "Slow."
To achieve quicker motion, select "Fast."

The Video Format tab allows users to select output formats for HDMI and SDI.

In Network Settings, the DHCP function can be enabled or disabled. Any changes in this section will force the system to reboot.

This concludes the overview of the PTC-205 menu.