圖文小節: About H/V Delay, Check Field, Zoom and Freeze

我註冊的課程

H/V Delay

Used to monitor the blanking area for H sync and V sync.

In H delay mode, the horizontal sync is delayed so that the horizontal blanking period is displayed on the screen.

In V delay mode, the vertical sync is delayed so that the vertical blanking period is displayed on the screen.

In H/V delay mode, both horizontal and vertical syncs are delayed, resulting in both horizontal and vertical blanking periods being shown on the screen.

Note: H/V Delay is disabled if the scan mode is set to pixel to pixel.

Check Field

The check field function offers the user Red-Only, Green-Only, and Blue-Only modes for screen calibration should you require them.

First, turn on the color bar, and then activate the single-color mode in the check field, as this allows you to perform screen calibration by adjusting the brightness, contrast, saturation, tint, and sharpness.

Zoom

The zoom function allows you to enlarge the image by a certain percentage (10 – 90%).

Note: Zoom control is disabled if the scan mode is set to pixel to pixel.

Freeze

The monitor’s screen freezes once enabled.

DSLR

This option is useful if Canon 5D2 or 5D3 cameras are connected to the TLM-170V.